Centos 5/5.5/6.0 and StorageWorks P2000

[Etzion Bar-Noy]

Probably.
At worst, you can download the 'megaraid' driver and compile/run it. You
should have boot driver floppy image in case you need it for boot and you
can't find it.

Ez

2011/5/25 Hetz Ben Hamo <hetzbh at gmail.com>

> Here is the output which mentions the SAS:
>
> 07:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008
> PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
>  Subsystem: Hewlett-Packard Company Device 3371
> Flags: bus master, fast devsel, latency 0, IRQ 10
>  I/O ports at 6000 [size=256]
> Memory at c7efc000 (64-bit, non-prefetchable) [size=16K]
>  Memory at c7e80000 (64-bit, non-prefetchable) [size=256K]
> [virtual] Expansion ROM at c2000000 [disabled] [size=512K]
>  Capabilities: [50] Power Management version 3
> Capabilities: [68] Express Endpoint, MSI 00
>  Capabilities: [d0] Vital Product Data <?>
> Capabilities: [a8] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
> Enable-
>  Capabilities: [c0] MSI-X: Enable- Mask- TabSize=15
> Capabilities: [100] Advanced Error Reporting
>  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
> ECRC- UnsupReq- ACSVoil-
>  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
> ECRC- UnsupReq+ ACSVoil-
>  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
> ECRC- UnsupReq- ACSVoil-
>  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>  AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>  Capabilities: [138] Power Budgeting <?>
>
> IIRC, the centos 5.5 installer should recognize it without any issues, am I
> right?
>
> Hetz
>
>
> 2011/5/24 Baruch Even <baruch at ev-en.org>
>
>> On May 24, 2011 1:57 PM, "Hetz Ben Hamo" <hetzbh at gmail.com> wrote:
>> >
>> > Hi,
>> >
>> > I'm trying to assist someone. He has an IBM Server and he's planning to
>> install CentOS 5.5
>> >
>> > Part of the setup is a storage box (which he is not administrating)
>> which is connected to the IBM with SAS cable.
>> >
>> > Are there any special instructions while doing the install to detect and
>> use this SAS connected storage? (the box has currently OpenSuSE and when
>> connecting the SAS cable, nothing showed up on /var/log/messages)..
>>
>> You are missing the sas controller driver probably. Try to do lspci to
>> find the sas controller model and from there you'll need to find the driver.
>>
>> Baruch
>>
>
>
> --
>
> *חץ בן חמו
> חץ-ביז (הוסטינג)
> *השכרה ואירוח של שרתים פיזיים
> השכרת שרתים וירטואליים מקצועיים וגדולים במחירים *קטנים*
> בקרו באתרנו בכתובת hetz.biz <http://www.hetz.biz/> ובבלוג שלנו:
> blog.hetz.biz
> טלפוןן: 0783333113/4/5, אימייל: sales at hetz.biz
> מסנג'ר: sales at hetz.biz - סקייפ: heunique
>
>
> _______________________________________________
> Linux-il mailing list
> Linux-il at cs.huji.ac.il
> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.cs.huji.ac.il/pipermail/linux-il/attachments/20110525/422dffdf/attachment.html>