Linux with Android MTP

[ik]

The dmesg errors:
....
[90892.247976] usb 4-1.2: new high-speed USB device number 61 using ehci-pci
[90892.336150] usbip-host 4-1.2:1.0: 4-1.2 is not in match_busid table...
skip!
[90892.336484] usbip-host 4-1.2:1.1: 4-1.2 is not in match_busid table...
skip!
[90892.336511] cdc_acm 4-1.2:1.1: This device cannot do calls on its own.
It is not a modem.
[90892.336589] cdc_acm 4-1.2:1.1: ttyACM3: USB ACM device
[90892.337460] usbip-host 4-1.2:1.3: 4-1.2 is not in match_busid table...
skip!
[90892.410843] usb 4-1.2: usbfs: process 30325 (go-mtpfs) did not claim
interface 0 before use
[90892.438597] usb 4-1.2: USB disconnect, device number 61
[90892.628063] usb 4-1.2: new high-speed USB device number 62 using ehci-pci
[90892.715178] usbip-host 4-1.2:1.0: 4-1.2 is not in match_busid table...
skip!
[90892.715538] usbip-host 4-1.2:1.1: 4-1.2 is not in match_busid table...
skip!
[90892.715552] cdc_acm 4-1.2:1.1: This device cannot do calls on its own.
It is not a modem.
[90892.715619] cdc_acm 4-1.2:1.1: ttyACM3: USB ACM device
[90892.716359] usbip-host 4-1.2:1.3: 4-1.2 is not in match_busid table...
skip!
[90892.781898] usb 4-1.2: USB disconnect, device number 62
...

Eliyaho: On a Windows machine, with usb2 it does work.



On Sun, Oct 6, 2013 at 4:50 PM, ik <idokan at gmail.com> wrote:

> Hello,
>
> I'm using Arch Linux, and have Samsung Galaxy S4.
> It uses MTP in order to allow me to access files.
>
> I'ved read several wiki's (Including Arch wiki) and forums about it, and
> came out for the following settings (/etc/udev/rules.d/51-android.rules),
> after install go-mtpfs:
>
> #               Galaxy S4 GT-I9500
> ATTR{idVendor}=="04e8", ATTR{idProduct}=="685d", SYMLINK+="android_adb",
> MODE="0666"
> ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", SYMLINK+="android_adb",
> MODE="0666"
> ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", SYMLINK+="android_adb",
> MODE="0666", ACTION=="add", RUN+="/usr/bin/sudo -b -u ik /usr/bin/go-mtpfs
> -allow-other=true -android=true /mnt/ando"
> ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", SYMLINK+="android_adb",
> MODE="0666", ACTION=="remove", RUN+="/bin/umount /mnt/ando"
>
>
> It does mount properly the content, however, when I try to access the
> content, it keep on looping an remounting everything until I take off the
> USB cable.
> I then need to wait several minutes to try again, or the loop just
> continue ...
>
> I can see the remounting also in /var/log/messages and dmesg.
>
> What am I missing or doing wrong here ?
>
> Thanks,
> Ido
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.cs.huji.ac.il/pipermail/linux-il/attachments/20131006/ef6af8bc/attachment-0001.html>