HP All-in-one scanner problem

Sun Aug 30 18:18:46 IDT 2015

Just curious - can you fax from applications? Personally I never tried
it - I do it the "old fashioned" way - from the scanner glass or ADF.

On Sun, 30 Aug 2015 18:07:02 +0300
David Suna <david at davidsconsultants.com> wrote:

> Thanks that works. Still not sure why I cannot find the scanner using
> sane. That would allow scanning directly into applications (like
> GIMP) rather than scanning in the browser and saving the file and
> opening it in the program.
> 
> On 08/30/2015 06:02 PM, Shlomo Solomon wrote:
> I have an HP 8610, but I assume the drivers and interface are similar.
> 
> In fact, I didn't even bother installing anything. If you go to
> http://"your-printer-IP" you get a very nice web interface to setup
> all aspects o the printer/scanner/fax.
> 
> In addition, if you chose SCAN from the menu, under Scan to Computer
> you'll find something called WEBSCAN which allows you to control the
> scanner from your browser.
>  
> Hope this helps
> 
> 
> 
> On Sun, 30 Aug 2015 15:35:22 +0300
> Efraim Flashner <efraim at flashner.co.il> wrote:
> 
> On my system using debian I installed hplip and ran hp-setup from the
> command line and that's how I dealt with my hp all-in-one.
> 
> On Sun, Aug 30, 2015 at 02:33:46PM +0300, David Suna wrote:
> <html style="direction: ltr;">
>   <head>
> 
>     <meta http-equiv="content-type" content="text/html;
> charset=utf-8"> <style type="text/css">body p { margin-bottom: 0cm;
> margin-top: 0pt; } </style> </head>
>   <body style="direction: ltr;" bidimailui-charset-is-forced="true"
>     text="#000000" bgcolor="#FFFFFF">
>     I recently purchased a new HP All-in-one machine model 3835. I
>     checked on <a class="moz-txt-link-freetext"
> href="http://hplipopensource.com/">http://hplipopensource.com/</a>
> and the model is listed as having full Linux support. I am running
> Debian 8.1. I am able to print. However, when I run scanimage -L it
> does not find the scanner at all. I tried adding the IP address of
> the device to the net.conf file in /etc/sane.d and when I run
> scanimage -L with debug messages I get the following:<br>
> SANE_DEBUG_NET=255 scanimage -L<br> [sanei_debug] Setting debug
> level of net to 255.<br> [net] sane_init: authorize != null,
> version_code != null<br> [net] sane_init: SANE net backend version
> 1.0.14 (AF-indep+IPv6) from sane-backends 1.0.24<br>
>     [net] sane_init: Client has little endian byte order<br>
>     [net] sane_init: searching for config file<br>
>     [net] sane_init: trying to add 10.0.0.24<br>
>     [net] add_device: adding backend 10.0.0.24<br>
>     [net] net_avahi_browse_callback: CACHE_EXHAUSTED<br>
>     [net] add_device: backend 10.0.0.24 added<br>
>     [net] sane_init: done reading config<br>
>     [net] sane_init: evaluating environment variable
> SANE_NET_HOSTS<br> [net] sane_init: evaluating environment variable
> SANE_NET_TIMEOUT<br> [net] sane_init: done<br>
>     [net] sane_get_devices: local_only = 0<br>
>     [net] connect_dev: trying to connect to 10.0.0.24<br>
>     [net] connect_dev: [0] failed to connect (Connection
> refused)<br> [net] connect_dev: couldn't connect to host (see
> messages above)<br> [net] sane_get_devices: ignoring failure to
> connect to 10.0.0.24<br> [net] sane_get_devices: finished (0
> devices)<br> [net] net_avahi_browse_callback: ALL_FOR_NOW<br>
>     <br>
>     I tried to search for solutions but haven't found anything.
> Anyone have any solutions or suggestions of where to look?<br>
>     <br>
>     Thanks,<br>
>     <pre class="moz-signature" cols="72">-- 
> David Suna
> <a class="moz-txt-link-abbreviated"
> href="mailto:david at davidsconsultants.com">david at davidsconsultants.com</a></pre>
> </body> </html>
> 
> 
> _______________________________________________
> Linux-il mailing list
> Linux-il at cs.huji.ac.il
> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
> 
> 
> 
> 
> 
> 

-- 
Shlomo Solomon
http://the-solomons.net
Sent by Claws Mail 3.11.1 - KDE 4.12.15 - LINUX Mageia 4