Skimping on AWS EC2 bills

Thu Jan 15 00:38:38 IST 2015

Hi Amos.
It means you make use of an instance which is very quick to load. Removing
non-esential services, or postponing them to after Jira starts, using a
lightweight system, etc. If you can remove boot-time hogs, you can reach a
fast-booting system. A script using Amazon API will prepare it for you.
I wouldn't use the elastic IP because of its price (I get the feeling you
seek something cheap). no-ip.com or other no-dns services could do the
trick, except that the VM in Amazon network is unaware of its external IP
(you might be able to query that using the API, BTW), and that it might
take a few minutes (one, maybe more) before you could connect to the
machine, because their update might no be immediate.
Other than that - seems fine.

Etzion

On Tue, Jan 13, 2015 at 12:28 PM, Amos Shapira <amos.shapira at gmail.com>
wrote:

> Etzion, just a question: "Amos 0 if you can customise your instance to be
> very very light," - what do you mean by that?
>
> Your description is close to what I have in mind.
>
> As for the changing IP address - this can be easily overcome using Elastic
> IP and/or no-ip.com and friends.
>
> Thanks,
>
> --Amos
>
> On 13 January 2015 at 08:11, Etzion Bar-Noy <ezaton at tournament.org.il>
> wrote:
>
>> Except that NUC costs about 700+ ILS (I have three. I know. This is the
>> Celeron version).
>> Amos 0 if you can customise your instance to be very very light, and it
>> can startup in about 15 seconds or so, it is acceptable to have it
>> on-demand. You can wrap it in a script (using AWS API and tools) to just
>> start it up. Since it will be about 15 seconds boot/startup time, you will
>> find that very economical, and very simple to achieve. In any case,
>> considering your requirements, this does seem to be the most simple and
>> easy solution. Note that your IP *will* change each time you start your
>> instance, so your API interface should also tell you what's the IP address
>> of the machine (or you could use some no-dns service, but it will probably
>> be slower).
>>
>> Etzion
>>
>> On Mon, Jan 12, 2015 at 8:57 PM, E.S. Rosenberg <esr+linux-il at g.jct.ac.il
>> > wrote:
>>
>>> I don't know what type of load JIRA presents but for low load private
>>> stuff a raspberrypi or something similar (for heavier but still fairly
>>> 'light' stuff maybe an Intel NUC system or a mini-itx system) at home +
>>> noip/dyndns or some other form of locating it by yourself can be more then
>>> enough....
>>>
>>> 2015-01-08 11:37 GMT+02:00 Amos Shapira <amos.shapira at gmail.com>:
>>>
>>>> I was thinking about running it on my own laptop, and perhaps I will.
>>>>
>>>> But that would mean leaving it on around the clock which I don't want
>>>> to (I'm very conscious of power consumption, both economically and
>>>> environmentally), and I don't carry it with me most of the time but would
>>>> like to have access to my server from both my mobile and workplace.
>>>>
>>>> On 8 January 2015 at 19:59, Vitaly <linux at karasik.org> wrote:
>>>>
>>>>> Amos,
>>>>> IMHO, it's not technical, but more  "human" issue. For example, as far
>>>>> as you decide that you need Jira every last day of month, you can launch
>>>>> instance automatically.
>>>>> But typically Jira usage is more random, so I don't think  there is
>>>>> technical solution exist.
>>>>> If you're the only Jira user, why don't run it from your own computer
>>>>> for free?
>>>>>
>>>>> And, BTW, AWS reserved instances allow you to modify everything; plus
>>>>> up-front pay isn't must anymore.
>>>>>
>>>>> regards,
>>>>> Vitaly
>>>>>
>>>>> On Thu, Jan 8, 2015 at 4:40 AM, Amos Shapira <amos.shapira at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Yes I'm well aware of the RI option. It can save up to %70 for
>>>>>> high-load (i.e. machines which are up 24/7), but much less saving compared
>>>>>> to something that you can keep bringing up and down on demand.
>>>>>> Also the up-front cost is not cheap, and commits you to that type of
>>>>>> instance (as far as I remember, you can't buy switch or upgrade an RI slot,
>>>>>> what's paid is paid).
>>>>>>
>>>>>> On 8 January 2015 at 12:47, Aviram Jenik <aviram at jenik.com> wrote:
>>>>>>
>>>>>>> I'm not an AWS expert and would love to hear from those who are. But
>>>>>>> we do have a few (dozen) instances on AWS.
>>>>>>>
>>>>>>> We have them running 24/7. I get that you could start and stop on
>>>>>>> demand, but don't get how you would do that without changing the way you
>>>>>>> work in a drastic way (compared to a physical machine). To save costs, buy
>>>>>>> a 'reserved instance'. You are paying up front for 1-3 years (I recommend 3
>>>>>>> years) and then paying a very very low cost per hour. If your load is low,
>>>>>>> buy the 'low load' machine to save even more costs (but then you pay hire
>>>>>>> fees if you cross the threshold). I don't know how this works well enough -
>>>>>>> we always buy the 'high load' instance and buy them for 3 years; the total
>>>>>>> average cost is equivalent to what we would have paid for the hosting and
>>>>>>> so the hardware is "free".
>>>>>>>
>>>>>>>
>>>>>>> - Aviram
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Jan 7, 2015 at 7:33 PM, Amos Shapira <amos.shapira at gmail.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> Do people here keep EC2 instances running?
>>>>>>>> Do you leave it running 24/7 or do you fire them up when you need
>>>>>>>> them?
>>>>>>>>
>>>>>>>> I'd like to run my own EC2 instance running $10 Jira + $10
>>>>>>>> Confluence (+$10 some extra useful add-ons) (to clarify - these are one-off
>>>>>>>> $10 for each product), but can't justify running a $30/month small EC2 (and
>>>>>>>> perhaps more, Jira alone requires 1.5-2GB of RAM) just to be used at most a
>>>>>>>> few hours a month if not less.
>>>>>>>>
>>>>>>>> But logging in to the console to fire it up (or through aws cli, or
>>>>>>>> using an Android based app) every time I want to access it also would be
>>>>>>>> inconvenient.
>>>>>>>>
>>>>>>>> So is there another way?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> --Amos
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Linux-il mailing list
>>>>>>>> Linux-il at cs.huji.ac.il
>>>>>>>> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> <http://au.linkedin.com/in/gliderflyer>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Linux-il mailing list
>>>>>> Linux-il at cs.huji.ac.il
>>>>>> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> <http://au.linkedin.com/in/gliderflyer>
>>>>
>>>> _______________________________________________
>>>> Linux-il mailing list
>>>> Linux-il at cs.huji.ac.il
>>>> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Linux-il mailing list
>>> Linux-il at cs.huji.ac.il
>>> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
>>>
>>>
>>
>
>
> --
> <http://au.linkedin.com/in/gliderflyer>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.cs.huji.ac.il/pipermail/linux-il/attachments/20150115/dc70a4a9/attachment-0001.html>