sound problem on Kubuntu 20.04

[Shlomo Solomon]

seems OK, but I'm sending the output - maybe I'm missing something:

pacmd list-sinks
1 sink(s) available.
  * index: 2
        name: <auto_null>
        driver: <module-null-sink.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1000
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right:
65536 / 100% / 0.00 dB balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max request: 344 KiB
        max rewind: 344 KiB
        monitor source: 2
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
        module: 29
        properties:
                device.description = "Dummy Output"
                device.class = "abstract"
                device.icon_name = "audio-card"



And with a bluetooth speaker connected:

pacmd list-sinks
1 sink(s) available.
  * index: 3
        name: <bluez_sink.F4_4E_FD_19_AE_B6.a2dp_sink>
        driver: <module-bluez5-device.c>
        flags: HARDWARE DECIBEL_VOLUME LATENCY 
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9050
        volume: front-left: 93061 / 142% / 9.14 dB,   front-right:
93061 / 142% / 9.14 dB balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max request: 2 KiB
        max rewind: 0 KiB
        monitor source: 3
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        fixed latency: 39.51 ms
        card: 1 <bluez_card.F4_4E_FD_19_AE_B6>
        module: 30
        properties:
                bluetooth.protocol = "a2dp_sink"
                device.description = "SENSOR S-1"
                device.string = "F4:4E:FD:19:AE:B6"
                device.api = "bluez"
                device.class = "sound"
                device.bus = "bluetooth"
                device.form_factor = "headset"
                bluez.path = "/org/bluez/hci0/dev_F4_4E_FD_19_AE_B6"
                bluez.class = "0x240404"
                bluez.alias = "SENSOR S-1"
                device.icon_name = "audio-headset-bluetooth"
                device.intended_roles = "phone"
        ports:
                headset-output: Headset (priority 0, latency offset 0
usec, available: unknown) properties:

        active port: <headset-output>








On Thu, 10 Dec 2020 08:27:56 +0200
borissh1983 at gmail.com wrote:

> On Thursday, 10 December 2020 7:56:23 IST Shlomo Solomon wrote:
> > I feel really stupid, but after hours of searching, I'm really
> > lost. No idea what I'm missing. 
> > 
> 
> I had a nasty PBCAK bug with debian recently that might be the same
> case for you, the default sink was sent to an inactive sink (muted). 
> 
> You can get your sinks by running pacmd list-sinks 
> 
> Check if that sink is set correctly to you, and is not muted (and
> enabled ! ).
> 
> 
> 
> 
> 
> 
> _______________________________________________
> Linux-il mailing list
> Linux-il at cs.huji.ac.il
> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il



-- 
Shlomo Solomon
http://the-solomons.net
Claws Mail 3.17.5 - KDE Plasma 5.18.5 - Kubuntu 20.04