From guy1gold at gmail.com  Tue Oct 20 01:43:31 2020
From: guy1gold at gmail.com (Guy Gold)
Date: Mon, 19 Oct 2020 18:43:31 -0400
Subject: Create a static network configuration from a DHCP lease`
In-Reply-To: <CAOjEGGtnPEcUS5X7cWEpriKQUq7gZJT+p4r8PFczgCxO5ehCnA@mail.gmail.com>
References: <CAHOQOwQ6t=DxF+oYyNh+48C9zsgqqFkAzGRZsQ3TGgTZ8jt3DA@mail.gmail.com>
 <CAKnt4U8355RUL0ymXcdX92FUZkBBgmWOh4VFRad1ZjcNJVVPwQ@mail.gmail.com>
 <CAOjEGGtnPEcUS5X7cWEpriKQUq7gZJT+p4r8PFczgCxO5ehCnA@mail.gmail.com>
Message-ID: <CALQ72QFqGzghdQuk1kCA1K0aN7G4Nt=wWeCC14OuUBnSSTjE_g@mail.gmail.com>

Another approach (being you know the future IP address of your
server), is to pass the IPaddr via a boot param, or better yet, use a
kickstart file to fully automate everything else in the installation.

https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/installation_guide/s1-kickstart2-options

network --bootproto=static --ip=10.0.2.15 --netmask=255.255.255.0
 --gateway=10.0.2.254 --nameserver=10.0.2.1

--
Guy

On Wed, Sep 30, 2020 at 2:37 PM Eden Adogla <eden.adogla at gmail.com> wrote:
>
> Another approach would be to update hook into the dhclient.d system like Shimi suggested and then edit the appropriate ifcfg-<interface-name> scripts found at /etc/sysconfig/network-scripts to hardcode the configs and then restart the interface. Such a change will guarantee that the config persists after boot.
>
> Cheers,
> Eden.
>
> On Wed, Sep 30, 2020 at 10:03 AM shimi <linux-il at shimi.net> wrote:
>>
>>
>> On Wed, Sep 30, 2020 at 4:26 PM David Cohen <cdavid68 at gmail.com> wrote:
>>>
>>> Hi,
>>> I'm looking for an automated way to convert the DHCP address a server gets during installation to a static IP configuration.
>>> I have fixed leases so no future conflict is expected.
>>> Is there a ready to use cli tool/script for CentOS 7 ?
>>>
>>
>> I don't know of an existing solution, however, you can probably throw a bash script to /etc/dhcp/dhclient.d/whatever.sh, and in it take the DHCP data stored in the variables:
>> $interface $new_ip_address $new_subnet_mask $new_routers $new_dhcp_lease_time $new_domain_name_servers
>>
>> and use them in nmcli commands to alter the existing connection to a static one with those settings, e.g. something along the lines of:
>>
>> nmcli con mod "$connection" ipv4.addresses $new_ip_address/$new_subnet_mask(may need to convert to CIDR?) gw4 $new_routers
>> nmcli con mod "$connection" ipv4.method manual
>> nmcli dev disconnect "$connection"
>> nmcli -w 10 dev connect "$connection"
>>
>> HTH,
>>
>> -- Shimi
>>
>> _______________________________________________
>> Linux-il mailing list
>> Linux-il at cs.huji.ac.il
>> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
>
> _______________________________________________
> Linux-il mailing list
> Linux-il at cs.huji.ac.il
> http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il



-- 
Guy Gold